:::
黃培堯教師照片
黃培堯助理教授

最高學歷：中正大學機械工程博士
研究室：TB415
聯絡電話：05-2267125轉22256
電子信箱：py.huang@wfu.edu.tw
個人專長：機械固力、機械熱流、精密製造
個人經歷：

  1. 中正大學機械工程學系助教
  2. 持能股份有限公司負責人
  3. 吳鳳科技大學機械系助理教授

期刊論文
  1. 鄭友仁 , 杜彬湧 , 黃培堯 , 2001, “ 微機電系統之結構接合方式 ,” 銲接與切割 , Vol. 11, No. 2.
  2. 鄭友仁 , 蔡宏榮 , 黃培堯 , 2001, “ 化學機械研磨技術簡介 ,” 機械月刊 , Vol. 313, pp. 304-313.)
  3. 鄭友仁 , 蔡宏榮 , 黃培堯 , 2001, “ 化學機械研磨製程簡介 ,” 機構與機器設計 , Vol. 12, No. 5, pp. 9-13.
  4. 鄭友仁 , 黃培堯 , 2005, “ 化學機械研磨製程研磨率及後清洗製程 ,” 機械月刊 .
  5. Yeau-Ren Jeng, Sang-Mao Chiu, Pay-Yau Huang and Shiuh-Hwa Shyu, 2010, “Investigation of Thermosonic Wire Bonding Resistance of Gold Wire onto Copper Pad,” IEEE Transactions on Electronics Packaging Manufacturing, Vol. 33, No. 1, pp. 65-70. (SCI)
  6. Hung-Jung Tsai, Shun-Jung Chiu, Hung-Cheng Tsai and Pay-Yau Huang, 2010, “Thermal and Shear Characteristics Study of Various Mechanical Polishing Materials,” Advanced Materials Research, Vol. 97-101, pp 2076-2079. (EI)
  7. Hung-Jung Tsai, Jeng-Haur Horng, Hung-Cheng Tsai, Shun-Jung Chiu and Pay-Yau Huang, 2010, “Effect of Shear and Thermal Characteristics on Chemical Mechanical Polishing,” Advanced Materials Research, Vol. 126-128, pp 271-275. (EI)
  8. De-Shin Liu, Shu-Shen Yeh, Chun-Teh Kao, Pay-Yau Huang, Chia-I Tsai, An-Hong Liu and Shu-Ching Ho, 2010, “An Experimental and Numerical Investigation into the Effects of the Chip-on-Film (COF) Processing Parameters on the Au-Sn Bonding Temperature,” Soldering & Surface Mount Technology, Vol. 22, No. 4, pp. 31-41. (SCI)
  9. Hung-Jung Tsai, Pay-Yau Huang, Ming-Yi Tsai, Hung-Cheng Tsai and Cin-Jhe Lin, 2011, “Investigation of Shear and Thermal Characteristics of Polishing Interface in Soft Pad Polishing Process,” Applied Mechanics and Materials, Vol. 55-57, pp. 508-511. (EI)
  10. Hung-Jung Tsai, Jeng-Haur Horng, Hung-Cheng Tsai and Pay-Yau Huang, 2011, “Tribological Applications Considering Roughness Effects on Grain Flow,” Advanced Materials Research, Vol. 328-330, pp 837-842. (EI)
  11. Hung-Jung Tsai, Pay-Yau Huang, Hung-Cheng Tsai, Shun-Jung Chiu, 2011, “Chemical Mechanical Polishing in Elastic Contact and Partial Hydrodynamic Lubrication: Modelling and Experiments,” Materials and Manufacturing Processes, Vol. 26:2, pp 319-324. (SCI)
  12. Hung-Jung Tsai, Hung-Cheng Tsai, Pay-Yau Huang, Jeng-Haur Horng and Shun-Jung Chiu, 2012, “The Experiments Study of Polishing Characteristics during Polishing Process,” Advanced Materials Research, Vol. 591-593, pp. 460-463. (EI)
  13. Liming Chang, Yeau-Ren Jeng and Pay-Yau Huang, 2013, “Modeling and Analysis of the Meshing Losses of Involute Spur Gears in High-Speed and High-Load Conditions”, Transactions of the ASME, Journal of Tribology, Vol. 135, No. 1, pp. 011504. (SCI)
會議論文
  1. 鄭友仁, 黃培堯, 潘文玨, 黃社振, 詹彥彬, 2011, “狹縫式塗佈製程噴嘴流場模擬,” The International Conference on Safety and Security Management and Engineering Technology, Chia-Yi, Taiwan, Nov 17-18.
  2. Hung-Jung Tsai, Jeng-Haur Horng, Hung-Cheng Tsai and Pay-Yau Huang, 2011, “Tribological Applications Considering Roughness Effects on Grain Flow,” International Conference on Mechatronics and Materials Processing (ICMMP2011), Guangzhou, China, Nov. 18-20.
  3. 鄭友仁, 黃培堯, 潘文玨, 詹彥彬, 2011, “銅銦鎵硒（CIGS）薄膜太陽能電池吸收層狹縫式塗佈製程噴嘴流場模擬,” The 35th National Conference on Theoretical and Applied Mechanics, 台南, 台灣, Nov. 18-19.
  4. 黃培堯, 蔡宏榮, 陳永昌, 湯峰菖, 2011, “研磨顆粒濃度對研磨界面溫昇影響之實驗探討,” 台灣磨粒加工學會一百年度研討會, 台北, 台灣, Dec 19.
  5. 陳永昌, 黃培堯, 蔡宏榮, 2011, “研磨顆粒尺寸對軟墊研磨製程溫昇實驗探討,” 中國機械工程學會第二十八屆全國學術研討會, 台中, 台灣, Dec, 10-11.
  6. 黃培堯, 楊適嘉, 湯峰菖, 蔡宏榮, 2012, “軟墊研磨製程接觸界面溫昇探討,” 中國機械工程學會第二十九屆全國學術研討會, 高雄, 台灣, Dec, 7-8.
技術報告
  1. 黃培堯 , 2 009 , “ 滑動界面性能檢測機量測標準建立與測試 ,” 民間產學 合作成果報告 ( WFC-E-C9-9707-108 )
  2. 黃培堯 , 2009, “ 冷軋製程之軋延界面磨潤分析模型開發 ,” 中鋼產學 合作成果報告
  3. 黃培堯 , 2 009 , “ 研磨顆粒效應對後清洗製程影響之探討 ,” 國科會研究成果報 告 (NSC 97-2221-E-2 74-003)

回上一頁